Hydrogen Peroxide Well Water System J-PRO-22 110V – 230V

Description

HYDROGEN PEROXIDE INJECTION SYSTEM FOR WELL WATER 110V - 220V
Remove odors and oxidize iron with hydrogen peroxide with no chlorine or chemical residuals!
Adds natural oxygen. No chlorine or chemical residuals
Works over a wide range of water flow rates for most home water wells
Good for well water flow rates from 1 to 50 Gallons Per Minute (1 - 50 GPM)
Pumps 0.1 to 22 gallons of solution per day
Works for line pressures up to 100 PSI
Dual Voltage: works on both 110v or 220v
Low Power Consumption:  Only uses 22 watts or 0.2 amps of power
Metering pump can deliver up from 0.5 to 22 gallons of solution per day and is fully adjustable to get just the right peroxide residual that is needed.
Dimensions: 15 gallon model: 14.5" wide x 24.5" height including pump (recommended for most applications)
Dimensions: 35 gallon model: 18" wide x 37" height including pump.(not needed for most unless large commercial application)
Stroke frequency up to 100 strokes per minute
De-gassing vent built-in makes the pump great for peroxide OR chlorination use.
Unlike Stenner-style peristaltic pumps: no pump tube failures, no rollers to go bad, needs less service, and good for continuous duty
These heavy-duty metering pumps systems are designed to last for many years with minimal maintenance.
Pump easily mounts on the top of the tank or a wall
Primes super fast, and won't lose its prime.
Complete system includes peroxide pump, solution tank, injection check valve, tubing, fittings
Easy and fast to install! Install so it turns on and off with well pump, OR use optional flow switch for plug and play operation.
Works great with a
Catalytic Carbon Whole House Backwash Filter.
Remove tastes odors and any residual peroxide with a Catalytic Carbon Backwash Filter!
WHAT IS INCLUDED?
J-PRO-22 Peroxide Injection Pump
15 or 35 gallon heavy-duty polyethylene solution tank (we recommend 15 gallon tank for most)
Tubing and fittings to connect pump to injection check valve and solution tank
1 Injection Check valve 1/2" male pipe thread
Suction tubing and foot valve to connect solution tank to pump
Degassing / Priming valve to make it easy to prime pump
Easy to read Manual
WHAT SIZE SOLUTION TANK SHOULD I ORDER?
We recommend the 15 gallon tank.
There is usually no home well water application where the 35 gallon tank is needed.
Most of our customers use 2 - 4 gallons of diluted peroxide solution per month
There is no advantage to using a larger solution tank in most cases unless you have a commercial application.
Mix up enough fresh peroxide solution to last for 3 months as peroxide can lose its strength over time.
WHAT TYPE OF PEROXIDE SHOULD I ESE?
We recommend using NSF Certified Hydrogen Peroxide 7%
For most applications the 7% is further diluted (easy instructions in guide)
Most of our customers use 1 -2 gallons of 7% peroxide per month depending on water chemistry and water usage
Our 7% peroxide stores for up to 8 to 12 months in cool dark dry location.
MANUFACTURER:
CWS
MANUFACTURER #:
MP001490
DOWNLOAD INSTALLATION GUIDE