-40%
Geekpure 10-Inch Whole House Water Filter Housing 4.5"x10"1-Inch 3PK
$ 52.79
- Description
- Size Guide
Description
*Note:this housing is not include the filter.
Complete
Complete set 10 inch blue housing,
with plastic wrench,screw and metal bracket
.Housing only, filter cartridges are sold separately .
Pack of 3 set.
Air release valve
Equip with pressure release button for high pressure .
How it works?
Please refer above photo.
Features:
10 Inch Housing-Complete one set 10 inch big blue housing,1"NPT inlet/outlet,with pressure release button for high flow,with plastic wrench and bracket, filter cartridges are sold separately
STANDARD-Fits all standard sized 4-1/2 inch diameter industry 10 inch whole house cartridges
HIGH QUALITY-Fits NSF standard,Large capacity housing for high flow applications
WARRANTY-One year limited warranty
RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA)
Specification:
Maximum Pressure: 90 psi (6.2 bar)
Temperature:40-110°F/5-45°C
Shelf life: 5 Years
More valuable information:
✪What is dimension of 1 blue housing?
It is 7"X7"X14" .
✪What is in the box?
3pcs
10inch blue housing with pressure release with 1inch NPT ,
3pcs
plastic wrench & bracket.
✪What is filters options?
you could search the replacement filters in geekpure store.
1.PP spun filter,Remove sand, dirt, sediment. life time:6 months.
2.Granular activited carbon filter,Remove chlorine, taste & odors, very fine particulates. life time:6months.
3.Carbon block filter,Further remove chlorine, taste & odors, very fine particulates. life time:6 months.
PS.The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality.
4 Pack PP Sediment Replacement Water Filter 4.5" x 10"
4 Pack Carbon Block Replacement Water Filter 4.5" x 10"
Note:
Please lubricate the o-ring with silicon grease and use wrench provided to prevent leakage.
2. Protect filter housing from freezing.
3. This filter housing has a maximum operating pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 80 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 70 psi or less.
4.The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur.